{"title":"Antennas","description":"","products":[{"product_id":"efhw-antenna-49-1-transformer","title":"EFHW Antenna 49:1 Transformer","description":"This is a hand made EFHW Antenna with a built in 49:1 Transformer. This is incredible for POTA, SOTA and other portable\/field operations. Setup in any end fed configuration you like.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease let me know if you are interested in a different configuration. With wire, without, 20m band, 40m band, etc. I can look at offering different configuration if there is interest.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Winder is Printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Ferrite Toroid is a F140 43 mix, size 23mm inside dimension by 35.55mm outside dimension and 12.7 tall. This is beefy for the application, a bit excessive for 100w SSB and at 50w digital, minimal heating effect was noticed during operation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire length for the band selected and a clip for the end. This is high quality, barely visible wire. Wire length is longer allowing you to trim to the portion of the band you like or simply fold it back at the end.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 40m Wire\" for a fully assembled wire winder with 68' (long for 40m band) of wire and an S clip, Ferrell and heat shrink if you want to put a loop on the end.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 20m Wire\" for fully assembled cut to 34', again long for the band for you to trim as desired.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled No Wire\" for the fully assembled toroid assembly with BNC connector.\u003cbr data-mce-fragment=\"1\"\u003e\"Kits\" are NOT assembled, you get to have the fun.\u003cbr data-mce-fragment=\"1\"\u003ePer request, \"Toroid +Winder...\" is just the winder and a toroid with no wire winding.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Winder only\" for just the winder.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease note the end of the wire is not terminated with a loop as shown in the photo. If selection is made with wire, a ferrule, heat shrink and clip is included to terminate the end after trimming length to desired frequency and SWR match by the user.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAssembly Instructions for the kit version can be found here: tinyurl.com\/tufteln\u003cbr\u003e","brand":"Tufteln","offers":[{"title":"Assembled \/ 40m Band Wire","offer_id":43281128915122,"sku":"","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 20m Band Wire","offer_id":43281128947890,"sku":"","price":81.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ No Wire","offer_id":43281128980658,"sku":"","price":66.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 40m Band Wire","offer_id":43281129013426,"sku":"","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 20m Band Wire","offer_id":43281129046194,"sku":"","price":47.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ No Wire","offer_id":43281129078962,"sku":"","price":33.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder + Toroid Only","offer_id":43281129111730,"sku":"","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder Only","offer_id":43281129144498,"sku":"","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/PXL_20211022_184644364.jpg?v=1694458668"},{"product_id":"portable-efrw-no-transformer-qrp-antenna","title":"Portable EFRW No Transformer QRP Antenna","description":"This is a hand made ultra portable antenna for use with portable radio. This works especially well when paired with a QRP rig with built in tuner or with an ATU such as the Elecraft T1 or ATU-10. The low profile makes for a small package enabling great portability and quick deployment.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTuner and Radio NOT included.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease let me know if you are interested in a different configuration. With wire, without, different length, etc. I can look at offering different configuration if there is interest.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Winder is Printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe winder is 2-5\/8\" x 5\" Talk about portable!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire and 2 clips for the setup. This is high quality, barely visible wire. Wire length if included in selection is cut to length and terminated with banana connectors at the transformer and loops at the opposite ends.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 17' 35' Wire\" for a fully assembled wire winder with one 17' counterpoise wire and one 35' radiator.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 17' 41' Wire\" for a fully assembled wire winder with one 17' counterpoise wire and one 41' radiator.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assm 28.5' 28.5' \" for a fully assembled wire winder one 28.5 ft counterpoise wire and one 28.5 ft radiator.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled No Wire\" for the fully assembled with BNC connector and banana connectors ready to solder to wire.\u003cbr data-mce-fragment=\"1\"\u003eOR make a Kit selection witch are NOT assembled, you get to have the fun.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Winder only\" for just the QRP winder.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAssembly Instructions are not available for the random wire at this time. Please see the EFHW kit version instructions found here: tinyurl.com\/tufteln The difference is the winding and addition of the counterpoise. Winding instructions are easily found by searching the web and Youtube videos can also be found.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAssembly Instructions for the kit version coming soon and will be found here: tinyurl.com\/tufteln\u003cbr\u003e","brand":"Tufteln","offers":[{"title":"Assembled \/ 17ft CP 41ft Radiator","offer_id":43281135567026,"sku":"","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 17ft CP 35ft Radiator","offer_id":43281135599794,"sku":"","price":68.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 17ft CP 28.5ft Radiator","offer_id":43656837759154,"sku":"","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 28.5ft CP 28.5ft Radiator","offer_id":43281135632562,"sku":"","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ No Wire","offer_id":43281135665330,"sku":"","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 17ft CP 41ft Radiator","offer_id":43281135698098,"sku":"","price":47.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 17ft CP 35ft Radiator","offer_id":43281135730866,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 17ft CP 28.5ft Radiator","offer_id":43656837791922,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 28.5ft CP 28.5ft Radiator","offer_id":43281135763634,"sku":"","price":49.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ No Wire","offer_id":43281135796402,"sku":"","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/IMG_1257_1_conv.jpg?v=1712922045"},{"product_id":"efhw-qrp-antenna-49-1","title":"EFHW QRP Antenna 49:1","description":"This is a hand made EFHW Antenna with a built in 49:1 Transformer. This is incredible for POTA, SOTA and other portable\/field operations. Setup in any end fed configuration you like.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease let me know if you are interested in a different configuration. With wire, without, 20m, 40m, etc. I can look at offering different configuration if there is interest.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Winder is Printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe winder is 2-5\/8\" x 5\" Talk about portable!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Ferrite Toroid is a T63-43 mix, size 16mm outside dimension. 2 of these make up the core to ensure efficiency of the antenna system. This is good for up to 30W SSB and 15W CW\/Digital.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire and a clip for the end. This is high quality, barely visible wire. Wire length is longer allowing you to trim to the portion of the band you like or simply fold it back at the end.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 40m Wire\" for a fully assembled wire winder with 68' (long for 40m) of wire and an S clip, Ferrell and heat shrink if you want to put a loop on the end.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 20m Wire\" for fully assembled cut to 34', again long for you to trim as desired.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled No Wire\" for the fully assembled toroid assembly with BNC connector.\u003cbr data-mce-fragment=\"1\"\u003e\"Kits\" are NOT assembled, you get to have the fun.\u003cbr data-mce-fragment=\"1\"\u003ePer request, \"Toroid +Winder...\" is just the winder and 2 torroids with no wire winding.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Winder only\" for just the QRP winder.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease note the end of the wire is not terminated with a loop as shown in the photo. If selection is made with wire, a ferrule, heat shrink and clip is included to terminate the end after trimming length to desired frequency and SWR match by the user.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAssembly Instructions for the kit version can be found here: tinyurl.com\/tufteln\u003cbr\u003e","brand":"Tufteln","offers":[{"title":"Assembled \/ 40m Band Wire","offer_id":43281149296818,"sku":"","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 20m Band Wire","offer_id":43281149329586,"sku":"","price":81.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ No Wire","offer_id":43281149362354,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 40m Band Wire","offer_id":43281149395122,"sku":"","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 20m Band Wire","offer_id":43281149427890,"sku":"","price":47.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ No Wire","offer_id":43281149460658,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder + Toroid Only","offer_id":43281149493426,"sku":"","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder Only","offer_id":43281149526194,"sku":"","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/PXL_20220216_204308170.jpg?v=1694460262"},{"product_id":"efrw-qrp-antenna-long-wire-9-1","title":"EFRW QRP Antenna Long Wire 9:1","description":"This is a hand made EFRW (End Fed Random Wire) Antenna with a built in 9:1 Transformer. This is incredible for POTA, SOTA and other portable\/field operations. Setup in any end fed configuration you like.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease let me know if you are interested in a different configuration. With wire, without, different length, etc. I can look at offering different configuration if there is interest.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Winder is Printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe winder is 2-5\/8\" x 5\" Talk about portable!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Ferrite Toroid is a T82 #2 mix to ensure efficiency of the antenna system. This is good for up to 30W SSB and 15W CW\/Digital.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire and 2 clips for the setup. This is high quality, barely visible wire. Wire length if included in selection is cut to length and terminated with banana connectors at the transformer and loops at the opposite ends.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 17' 35' Wire\" for a fully assembled wire winder with one 17' counterpoise wire and one 35' radiator.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled 17' 41' Wire\" for a fully assembled wire winder with one 17' counterpoise wire and one 41' radiator.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled No Wire\" for the fully assembled toroid assembly with BNC connector and banana connectors ready to solder to wire.\u003cbr data-mce-fragment=\"1\"\u003eOR make a Kit selection witch are NOT assembled, you get to have the fun.\u003cbr data-mce-fragment=\"1\"\u003ePer request, \"Toroid +Winder...\" is just the winder and toroid with no wire winding.\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Winder only\" for just the QRP winder.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAssembly Instructions for the kit version can be found here: tinyurl.com\/tufteln\u003cbr\u003e","brand":"Tufteln","offers":[{"title":"Assembled \/ 17ft CP + 58ft Radiator","offer_id":43281172136114,"sku":"","price":100.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 17ft CP + 41ft Radiator","offer_id":43281172168882,"sku":"","price":93.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 17ft CP + 35ft Radiator","offer_id":43281172201650,"sku":"","price":89.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ No Wire","offer_id":43281172234418,"sku":"","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 17ft CP + 58ft Radiator","offer_id":43281172267186,"sku":"","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 17ft CP + 41ft Radiator","offer_id":43281172299954,"sku":"","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 17ft CP + 35ft Radiator","offer_id":43281172332722,"sku":"","price":46.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ No Wire","offer_id":43281172365490,"sku":"","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder and Toroid Only","offer_id":43281172398258,"sku":"","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder Only","offer_id":43281172431026,"sku":"","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/PXL_20220526_145421001.jpg?v=1694461828"},{"product_id":"efrw-antenna-9-1-transformer","title":"EFRW Antenna 9:1 Transformer","description":"This is a hand made EFHW Antenna with a built in 9:1 Transformer. This is incredible for POTA, SOTA and other portable\/field operations. Setup in any end fed configuration you like.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Winder is Printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Ferrite Toroid is a F130 2 mix 100w SSB and 50w digital.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire and a clip for the end. This is high quality, barely visible wire. Wire length is longer allowing you to trim to the portion of the band you like or simply fold it back at the end.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled with 71ft Wire\" for a fully assembled wire winder with 71 feet of wire and an S clip, Ferrell and heat shrink if you want to put a loop on the end.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSelect \"Assembled No Wire\" for the fully assembled toroid assembly with BNC connector.\u003cbr data-mce-fragment=\"1\"\u003e\"Kits\" are NOT assembled, you get to have the fun.\u003cbr data-mce-fragment=\"1\"\u003ePer request, \"Toroid +Winder...\" is just the winder and a toroid with no wire winding. \u003cbr data-mce-fragment=\"1\"\u003eSelect \"Winder only\" for just the winder.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 9:1 unun transformer can be use on other \"random wires\" as well. Please note the photo with a spring clip, the clip is not included but shows how to easily connect to random wires or even a downspout gutter on your house. An isolator may be desired as well (not included).\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease note the end of the wire is not terminated with a loop as shown in the photo. If selection is made with wire, a ferrule, heat shrink and clip is included to terminate the end after trimming length to desired frequency and SWR match by the user.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAssembly Instructions for the kit version can be found here: tinyurl.com\/tufteln\u003cbr\u003e","brand":"Tufteln","offers":[{"title":"Assembled \/ 84ft Radiator","offer_id":43281189863602,"sku":"","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 71ft Radiator","offer_id":43281189896370,"sku":"","price":90.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 58ft Radiator","offer_id":43281189929138,"sku":"","price":86.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 41ft Radiator","offer_id":43281189961906,"sku":"","price":83.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ No Wire","offer_id":43281189994674,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 84ft Radiator","offer_id":43281190027442,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 71ft Radiator","offer_id":43281190060210,"sku":"","price":58.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 58ft Radiator","offer_id":43281190092978,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ 41ft Radiator","offer_id":43281190125746,"sku":"","price":51.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ No Wire","offer_id":43281190158514,"sku":"","price":37.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder and Toroid Only","offer_id":43281190191282,"sku":"","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ Winder Only","offer_id":43281190224050,"sku":"","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/PXL_20211101_120927809.jpg?v=1694462646"},{"product_id":"20m-delta-loop-qrp-portable-antenna","title":"20m Delta Loop QRP Portable Antenna","description":"\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is a handmade 20m Delta Loop Antenna with a built in 4:1 Transformer. This is incredible for POTA, SOTA and other portable\/field operations.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRecommended setup is an equilateral triangle with one corner elevated and a flat bottom elevated several feet above the ground which will produce less than a 2.0:1 SWR across the 20m Band. Feed point can either the center or corner of the bottom of the triangle. A tuner may also be used for 17m and even 15m with some performance loss.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Winder is printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWire if included it is No. 26. Poly-Stealth Antenna Wire. This should be roughly 71’ in length for 20m.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBuild instructions for the kit version when available can be found at: \u003cstrong data-mce-fragment=\"1\"\u003etinyurl.com\/tufteln\u003c\/strong\u003e\u003c\/p\u003e","brand":"Tufteln","offers":[{"title":"20m Assembled with Wire","offer_id":43305923739826,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/IMG_4466.jpg?v=1696026554"},{"product_id":"efrw-qrp-antenna-long-wire-4-1","title":"EFRW QRP Antenna Long Wire 4:1","description":"\u003cp\u003eThis is a hand made EFRW (End Fed Random Wire) Antenna with a built in 4:1 Transformer. This is incredible for POTA, SOTA and other portable\/field operations. Setup in any end fed configuration you like. The 4:1 is highly efficient and allows matching by limited tuners like the KX1 or KH1. Rated for 20w.\u003c\/p\u003e\n\u003cp\u003eThis Configuration paired with the KH1 was discovered by Adam K6ARK to be a fantastic match. You can actually build this with his kit found on Amazon. And, if you need an even smaller antenna, build from his kit, its fantastic!\u003c\/p\u003e\n\u003cp\u003ePlease let me know if you are interested in a different configuration. With wire, without, different length, etc. I can look at offering different configuration if there is interest.\u003cbr\u003e\u003cbr\u003eThe Winder and housing is Printed in ASA and can handle the elements but is not intended for long term or permanent outside installation.\u003cbr\u003e\u003cbr\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire and 2 clips for the setup. This is high quality, barely visible wire. Wire length if included in selection is cut to length and terminated with banana connectors at the transformer and loops at the opposite ends.\u003cbr\u003e\u003cbr\u003eCurrent offering is a 15ft radiator and 7.5ft counterpoise allowing for 40m band and up as tested on the KH1.\u003c\/p\u003e\n\u003cp\u003eBuild video for the kit version: https:\/\/youtu.be\/GOEi_Z_7cco\u003c\/p\u003e","brand":"Tufteln","offers":[{"title":"Assembled \/ w\/ wire 15ft + 7.5ft","offer_id":45460410040498,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ w\/ wire 30ft + 15ft","offer_id":47477593833650,"sku":null,"price":90.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ w\/ wire 15ft + 7.5ft","offer_id":45460410106034,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ w\/ wire 30ft + 15ft","offer_id":47477593866418,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true},{"title":"Kit \/ no wire","offer_id":45460410138802,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/IMG_0385.jpg?v=1731894099"},{"product_id":"qrp-reel-antenna-efhw-20m","title":"QRP Reel Antenna","description":"\u003cp\u003eThis is a hand made Reel Antenna with a built in transformer. A full wire antenna on a reel all while being smaller than most QRP radios! This is incredible for POTA, SOTA and other portable\/field operations. Setup in any end fed configuration you like.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe modular version has the transformer in a small cylindrical cover which can nest into the spool (instead of the transformer built into the winder itself.) In the modular version, pull out the transformer, attached to the radio\/coax\/atu and then walk out the antenna radiator...The radiator end is terminated with a loop that hooks onto the spool internal hooks. As there is no permanent attachment of the radiating wire to the spool, simply insert the loop end of the wire into the spool and rotate the handle to catch the loop on one of the 4 internal hooks. You can wind in either direction!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWire is Polystealth 26awg for ultimate portability, silky smoothness and unmatched durability and performance per foot!\u003c\/p\u003e\n\u003cp\u003eSuper lightweight Spool!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e31' Modular BNC-F  2.5oz \/ 71g\u003c\/li\u003e\n\u003cli\u003e20m EFHW Modular BNC-M 2.6oz \/ 76g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eAll version are rated for 10w digital\/CW or 20w SSB.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eAll parts are printed in ASA and PETG and can handle the elements but is not intended for long term or permanent outside installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you order with Wire, you get No 26. Poly-Stealth Antenna Wire. This is high quality, barely visible wire. Wire length if included in selection is cut to length and terminated with banana connectors at the transformer and loops at the opposite ends. If you want the EFHW long and not terminated please make a note in your order.\u003c\/p\u003e\n\u003cp\u003ePlease let me know if you are interested in a different configuration. With wire, without, different length, etc. I can look at offering different configuration if there is interest.\u003cbr\u003e\u003cbr\u003eAssembly Instructions for the kit version if offered can be found here: tinyurl.com\/tufteln\u003c\/p\u003e","brand":"Tufteln","offers":[{"title":"20m Modular EFHW 49:1 BNC-M","offer_id":47595978391730,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true},{"title":"31ft Modular EFRW 9:1 BNC-F","offer_id":47595978424498,"sku":null,"price":100.0,"currency_code":"USD","in_stock":true},{"title":"Spare Spool Winder","offer_id":47617333756082,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0549\/5537\/6818\/files\/IMG_4362.jpg?v=1781735008"}],"url":"https:\/\/tufteln.com\/collections\/antennas.oembed","provider":"Tufteln","version":"1.0","type":"link"}